NEW! mmf-1.3 turntable

music hall mmf-1.3 turntable

Our new entry-level turntable provides a feature set that is unrivaled at its price. With a built-in phono preamplifier and a quality, pre-mounted cartridge, the mmf-1.3 is everything you need to start listening to vinyl right out of the box!
turntable music hall mmf-1.3 included cartridge

A quality Audio-Technica cartridge is pre-mounted and precision-aligned.

turntable built in phono preamplifier

A built-in phono preamplifier allows you to connect the mmf-1.3 directly to your current system.

music hall mmf-1.3 platter and mat

A thick rubber mat—which rests upon an aircraft-grade aluminum platter—dampens ambient vibration.

bargain belt drive turntable music hall mmf-1.3

The belt comes pre-mounted to the platter, making setup a snap.

turntable speed control music hall mmf-1.3

A built-in speed control circuit ensures the accuracy of the mmf-1.3’s 3 speeds.

music hall turntable mmf-1.3 dust cover

A hinged dust cover keeps your mmf-1.3 protected when not in use.

mmf-1.3

The music hall mmf-1.3 turntable is a 3-speed, belt driven audiophile turntable with a built-in phono preamp and a pre-mounted cartridge at a bargain price: just $299!

feature list

  • belt drive
  • electronic speed controlled motor
  • 33 1/3, 45, and 78 rpm
  • aluminum tonearm with
      removable headshell
  • piano black MDF plinth
  • vibration-damping rubber platter mat
  • Audio Technica AT3600L cartridge
      ($50 value)
  • aluminum platter
  • dust cover
  • built-in phono pre-amp
  • removable RCA cables
  • vibration damping feet

technical specifications

GENERAL SECTION
power supply DC12V,2.0A
universal power supply
consumption 4W
dimensions 17.1(W) x 14.5(D) x 4.2(H) in.
435(W) x 367(D) x 106(H) mm
weight 11lbs. | 5Kg

 

TURNTABLE SECTION
type 3-speed full manual
motor DC motor
driving method belt drive
turntable platter 296mm dia. aluminum die-cast
speeds 33 1/3, 45, and 78rpm
wow and flutter typical: less than 0.1% WTD at 3KHz RMS(CD-4005)
limit: Less than 0.15% WTD at 3KHz RMS(CD-4005)
S/N ratio more than 62dB (DIN-B) (SS-4242)
speed tolerance 3000Hz +/-1%(CD-4005)

 

CARTRIDGE SECTION
type moving magnetic cartridge
stylus diamond stylus
height of arm lifter 7.5mm (the distance between the record and the stylus when the lifter
lever is pulled up)
channel separation within 2.5 dB at 1KHz (CD-4005)
channel balance within 2.5 dB at 1KHz (CD-4005)
phono output level 1.5~3.6 mV at 1KHz 5cm/sec (CD-4005)
line output 90-216 mV at 1KHz 5cm/sec (CD-4005)
RIAA 20Hz~20KHz: +1/-3 dB

 

CARTRIDGE
cartridge AT3600L
output voltage 2.5mV +/- 3dB at 1KHz 3.54cm/sec (AT6606A)
channel separation more than 18dB (AT6606A)
channel balance within 2dB at 1KHz (AT6606A)
frequency response 0 +/-3dB at 10KHz (AT6606A)(Value at 10KHz based on value at 1KHz)
tracking force 3.5 ± 0.5 g

 

TONEARM SECTION
type dynamic balanced straight shaped w/soft damping control
effective arm length 221.5mm
overhang 19mm
offset angle 25.61
tracking error angle 3 degree or less
stylus pressure adjustment method rotation movability
arm lifter oil damper type

download manual

back to Turntables index page